Demivolt logo

How to Pay International Contractors: A Step-by-Step Guide

Published 13 November 2026

How to pay international contractors: agree terms, pick the payment route and currency, check withholding tax, and keep records that stand up to review.

How to Pay International Contractors: A Step-by-Step Guide

How to Pay International Contractors: A Step-by-Step Guide

Business owner checks an international contractor payment

The safest way to pay international contractors is to pay from a dedicated business account, using the cheapest rail that reaches the contractor’s own bank account, in a currency you have agreed in writing, after you have checked whether any tax must be withheld. Demivolt, an Electronic Money Institution (not a bank) authorised by the Bank of Lithuania, gives businesses a business account with a dedicated IBAN and SEPA, SWIFT and T2 payments, so that routine contractor payments run from one regulated account with a clear record.

This guide is for finance leaders, founders and advisers at small and medium-sized businesses who pay freelancers, agencies or consultants abroad. It covers what to agree before paying, how to choose a payment route, how currency and charges work, what tax checks apply and how to document each payment.

Demivoltdemivolt.comMake Cross-Border Payments ClearerManage contractor payments from a business account with a dedicated IBAN, using SEPA, SWIFT and T2 payment options.Visit

TL;DR

  • Agree the legal name, bank details, currency, invoice format and who bears bank charges in writing before the first payment.
  • For euro payments inside the SEPA area, SEPA is usually the lowest-cost route; for other destinations, SWIFT is the standard route.
  • Cross-border euro charges must match domestic charges of the same value under EU rules, but SWIFT and currency conversion costs still need to be checked in advance.
  • Withholding tax on payments to non-resident contractors varies by country: check the rule in the country where the work is done before you pay.
  • Keep the contract, invoice, payment confirmation and tax documents together for every payment.

Table of Contents

Step 1: Agree the terms before you pay anyone

Most problems with overseas contractor payments start before the money moves. A payment that is returned, delayed or queried by your auditor usually traces back to missing or inconsistent details. Before the first invoice, put the following in a written agreement or statement of work:

  • Legal name and status. The contractor’s exact legal name, whether they are an individual or a company, and their address and tax identification number. The name on the invoice must match the name on the receiving bank account.
  • Scope and deliverables. What is being delivered, when, and what triggers payment: a milestone, a monthly invoice or a delivered output.
  • Currency. The currency of the invoice and the currency in which the contractor receives funds. If they differ, say who carries the conversion cost.
  • Payment timing. Payment terms in days from invoice receipt, and the day your business actually releases funds.
  • Bank charges. Who pays the sending bank’s fee, intermediary fees and the receiving bank’s fee.
  • Tax responsibilities. That the contractor is responsible for their own tax, and that you may deduct withholding tax where local law requires it.
  • Invoice requirements. The fields you need on every invoice: invoice number, date, description, amount, currency, bank details and any tax number.

This list is also your control against payment fraud. Change requests for bank details are a common route for fraud, so confirm any change through a second channel and update the record only against a signed instruction.

Step 2: Check worker status and whether you need a local entity

A contractor is paid against an invoice for services. An employee is paid through payroll with local tax and social security. Calling someone a contractor does not make them one: the rules on classification are set by the country where the person works, and they can differ from the country where you are based. Review the day-to-day reality (who directs the work, who supplies tools, whether the person works for others) against the rules of the contractor’s country, and take local advice where the relationship looks like employment.

You generally do not need a local company to engage an independent contractor. A law firm’s overview notes that in most countries an overseas company can employ or engage workers without a local entity, and that the decision depends on tax, credibility, risk and filing obligations. The same source warns that employee activity in a country can create a permanent establishment, a taxable presence, and trigger corporation tax there. For contractors, the practical point is to keep the relationship genuinely independent and to document it.

Step 3: Choose how to pay

There are four main types of route, and each suits a different situation.

Route Best for What to watch
SEPA credit transfer Euro payments to contractors with an IBAN in the SEPA area Euro only; instant where both banks support it
SWIFT international transfer Payments to most other countries and currencies Fees at sending, intermediary and receiving stages; tracking
T2 euro payment High-value or time-sensitive euro transfers Used for larger amounts where timing matters
Third-party payment platforms and contractor management tools Very high volumes of small payouts to many individuals Per-payment fees, platform lock-in, a separate balance outside your main account

For most SMEs paying a handful of contractors, a business account that supports SEPA and SWIFT from one place is the simplest set-up. You pay from your own account, the contractor receives funds in their own bank account, and every payment sits in one statement alongside your other business transactions.

SEPA for euro payments

If the contractor is in the SEPA area and invoices in euro, SEPA is the natural route. As examples for lower-risk businesses based in Lithuania, Demivolt’s fee schedule shows SEPA Out at 0.40 € per payment and SEPA In at 0 €. Fees for other jurisdictions, business models and higher-risk profiles are set case by case, so treat these as illustrations, not a fixed rate for every business. Demivolt’s free SEPA Fee Calculator lets you estimate the cost of a batch of payments before you run it.

Before sending, check the contractor’s IBAN. A mistyped IBAN is the most common cause of a failed euro payment, and the free IBAN Validator confirms that the structure and check digits are valid before you submit.

SWIFT for everything else

For contractors outside the SEPA area, or where the invoice is in another currency, SWIFT is the standard route. As examples for lower-risk Lithuanian businesses, SWIFT Out is 30.00 € and SWIFT In is 25.00 € per payment at Demivolt, again set case by case for other profiles. Because a payment can pass through intermediary banks, the amount received can differ from the amount sent unless the charge instruction is agreed. Our guides on cutting SWIFT fees with a treasury checklist and on avoiding currency conversion losses go into the detail, and our guide to tracking a payment with SWIFT gpi shows how to follow a transfer once it is sent.

For a worked example, suppose you owe a contractor in a non-euro country the equivalent of 2,000 €. If you send with the sender covering all charges, the contractor receives the full invoiced amount and you pay the SWIFT fee. If the contractor bears the charges, they receive less and may dispute the invoice. Deciding this in Step 1 avoids that conversation.

Where platforms and payroll tools fit

Platforms that collect and distribute payouts can make sense for companies paying hundreds of individuals each month. For a smaller set of contractors, they add another balance and another set of fees outside your main business account. Weigh that against the simplicity of paying straight from your own IBAN.

Step 4: Choose the payment currency and understand the cost

Three costs apply to a cross-border payment: the transfer fee, the exchange rate margin if the currency is converted, and any intermediary or receiving charges. The exchange rate margin is often the largest and the least visible.

In the EU, Regulation 2021/1230, published in the Official Journal on 30 July 2021, requires that charges for cross-border euro payments equal the charges for corresponding national payments of the same value. It also requires currency-conversion charges on card-based transactions to be expressed as a percentage mark-up over the latest ECB euro foreign-exchange reference rate and disclosed to the payer before the transaction. That is a useful benchmark: whichever route you use, ask for the conversion margin in the same terms so you can compare it with the reference rate.

Practical rules for choosing the currency:

  1. Invoice in the currency the contractor costs in. If their expenses and tax are in one currency, invoicing in it protects them from exchange swings, and they are more likely to accept a lower rate.
  2. Pay in the invoice currency where you can. Converting twice, once at your end and once at theirs, costs more than converting once.
  3. Hold the currency you pay regularly. A multi-currency account across 31 currencies lets you hold funds ahead of regular payments, so you convert when it suits you rather than on the day an invoice falls due.
  4. Compare conversion cost against the reference rate, not against a rate quoted by the provider alone.

Our article on choosing the currency of international transfers sets out the trade-offs in more detail.

Step 5: Check withholding tax before you pay

This is the step most guides skip and the one with the largest cost when it goes wrong. Some countries require the person who pays a non-resident for services to deduct tax at source and pay it to the tax authority. If you are the payer and you do not withhold, the liability can fall on you.

Whether withholding applies depends mainly on where the work is performed and where the income is sourced, not just where the contractor lives. A contractor working from their own country for a UK or EU client commonly has no withholding. A contractor performing services physically in another country may. Examples from official sources show how much the rules differ:

These rates change, so treat them as examples of how the rules vary, and check the tax authority’s page for the country concerned before each new engagement. Where the position is unclear, take advice from a qualified tax adviser in the country where the work is performed. Do not guess: an underpaid withholding is far more expensive than a short delay.

A simple routine: for each new contractor, record where they live, where the work is performed, whether any treaty applies and which form or certificate they gave you. Keep it with the contract.

Step 6: Make the payment and keep the record

Once terms, route, currency and tax are settled, the payment itself is short:

  1. Match the invoice to the contract and check the amount, currency and date.
  2. Validate the beneficiary details, including the IBAN for euro payments.
  3. Have a second person with the right permission approve the payment. Role-based user permissions on a business account let you separate the person who prepares payments from the person who approves them.
  4. Send the payment with the agreed charge instruction.
  5. Save the payment confirmation. For SWIFT payments, track the transfer if it has not arrived within the expected time.
  6. File the invoice, confirmation and any tax form together under the contractor’s name.

Record-keeping rules also differ by country. For example, China’s foreign exchange regulator requires that a cross-border remittance application state the actual currency and amount at the point the payment crosses the border, with overseas bank fee deductions declared under specific transaction codes. The lesson for any payer is the same: your records should show what left your account, in what currency, and what arrived.

Sub-accounts help here. Keeping a separate sub-account for contractor payments makes the monthly reconciliation straightforward, because everything leaving it is a contractor cost.

Where Demivolt fits

Demivolt is an Electronic Money Institution authorised and regulated by the Bank of Lithuania (licence No. 77) and a direct SEPA participant through CENTROlink, so it issues IBANs on its own infrastructure. A Demivolt business account includes a dedicated IBAN in your company’s name, SEPA, SWIFT and T2 payments, currency exchange across 31 currencies, sub-accounts and role-based user permissions. Account opening, verification and monthly maintenance are shown at 0 €, as are the Dedicated Client Manager and internal transfers between Demivolt accounts. These are example fees for lower-risk businesses based in Lithuania and are set case by case for other profiles.

Where Demivolt fits

Each business is reviewed individually on its structure, activity and payment flows. Low- to medium-risk applications typically take a few business days, and higher-risk ones may take longer. Demivolt cannot onboard businesses registered or resident in its restricted jurisdictions, and it does not process payments to or from them, so confirm the contractor’s country before you plan a payment.

See Demivolt Payments for the payment rails, or open a business account to start paying contractors from one regulated account.

Demivolt

Industry pages show how the set-up looks in practice for software and SaaS companies, professional services firms and import, export and wholesale businesses, all of which routinely pay contractors abroad.

Our perspective

Paying a contractor abroad is a compliance event as much as a payment. The transfer takes minutes; the contract, tax check and record that surround it are what an auditor, a bank or a partner will look at later.

We built Demivolt around that view. A dedicated IBAN in your company’s name, SEPA, SWIFT and T2 payments, sub-accounts and role-based permissions under one regulated framework mean the payment and its evidence sit in the same place. A free dedicated client manager means you have a named person to ask when a payment needs attention.

For businesses that also need to show their own controls to a bank or a sponsor, we offer compliance services covering KYC and KYB procedures, transaction monitoring and sanctions screening, which is the same discipline applied to contractor payments.

Demivolt Team

FAQ

What is the best way to pay international contractors?

For most SMEs, paying directly from a business account over SEPA for euro payments and SWIFT for other destinations is the simplest route. The contractor receives funds in their own bank account and you keep a single record. Choose the invoice currency and charge instruction in advance to avoid short payments.

Can a UK company pay someone abroad?

Yes. A UK business can pay an overseas contractor by international bank transfer without a local entity in the contractor’s country. You still need to confirm the contractor’s status, check whether the country where the work is done requires withholding tax and keep the invoice and payment records.

Do I need a local entity to pay an overseas contractor?

Generally not. An overseas company can usually engage an independent contractor without a local entity. A permanent establishment risk arises mainly when staff or dependent agents carry out activity in the country, so keep the relationship genuinely independent and take local tax advice if you are unsure.

How do I avoid losing money on fees and exchange rates?

Agree who pays the bank charges, pay in the invoice currency where possible and compare any conversion margin with the published reference rate. Estimate transfer costs first with a fee calculator, and validate the IBAN before sending to avoid returned payments.

Can Demivolt pay contractors in any country?

Demivolt cannot process payments to or from its restricted jurisdictions, and it cannot onboard businesses registered or resident there. For other destinations, SEPA and SWIFT payments are available subject to each business’s individual review and payment profile.

Sources

This article is for general information only and does not constitute financial, legal or tax advice. Demivolt UAB is an electronic money institution authorised and regulated by the Bank of Lithuania (EMI licence No. 77).